“Sticker Kit Blackout” has been added to your basket.
View basket
Showing 1521–1536 of 1881 results
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
90,00€ 150,00€
Give your pinball machine a unique touch with these side arts in plexiglass or vinyl , designed for precise installation and a flawless finish.
Easy Installation:
Plexiglass Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Secure it in place.
Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.
Vinyl Version:
Place the pinball machine on its metal arms and remove the hinge screw.
Lightly sand the surface where it will be applied and clean thoroughly.
Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
Smooth it out to ensure strong adhesion.
Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.
👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades .
Package Contents: 1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).
Note: Dimensions may slightly vary depending on the selected model and design.
15,00€
Easy to install : These pre-cut, laminated stickers are easy to install: just stick them where you want them.
Package content :
17 x Customization stickers
Note : Dimensions may vary slightly depending on the model and design chosen.
15,00€
Easy to install : These pre-cut, laminated stickers are easy to install: just stick them where you want them.
Package content :
7 x Customization stickers
Note : Dimensions may vary slightly depending on the model and design chosen.
15,00€
Easy to install : These pre-cut, laminated stickers are easy to install: just stick them where you want them.
Package content :
1 x Customization stickers
Note : Dimensions may vary slightly depending on the model and design chosen.
