Showing 1–16 of 292 results

Select options This product has multiple variants. The options may be chosen on the product page

Backboard Attack From Mars

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard Dirty Harry

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard Guardians of the galaxy

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard Indiana Jones

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard The Shadow

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard The Shadow V2

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard Tron

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard Twilight Zone

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Backboard Twilight Zone V2

45,00€ – 60,00€

Easy to install : Installation of the backboard may require removal of certain pinball components, depending on the model selected. The vinyl version requires more dexterity and preparation of the surface to ensure smoothness. The plexiglass version is easier to install, and requires no surface preparation.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Add to basket

Panel Godzilla premium

60,00€

Easy to install : Panel installation is child’s play with Magnetic Ultra Gloss material: simply position it on the panel.

 

Package contents :

  • 1 x high-gloss magnetic panel

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art ACDC

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Addams Family

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Addams Family V2

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Aerosmith

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Alice Cooper

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Alien

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.