Showing 1217–1232 of 1690 results

Select options This product has multiple variants. The options may be chosen on the product page

Side art Dracula

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Earthshaker

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvira Party monster

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvira Party monster black

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvira Party monster V2

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvira’s house of horror

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvira’s house of horror V2

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvira’s house of horror V3

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvis

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art F-14 Tomcat

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art F-14 Tomcat V2

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Fish tales

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Foo Fighters

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Funhouse

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Funhouse Rudy’s nightmare

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Game of thrones

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : https://pu-parts.com/pinball-assembly-blades

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.