Showing 33–48 of 292 results

Select options This product has multiple variants. The options may be chosen on the product page

Side art Congo

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Creature from the black lagoon

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Creature from the black lagoon sunset

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art CSI

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Cueball wizard

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Deadpool

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Deadpool V2

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Dialed in

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Diner

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Diner V2

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Dirty Harry

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Doctor Who

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Dracula

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Dungeon & Dragons

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Earthshaker

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Select options This product has multiple variants. The options may be chosen on the product page

Side art Elvira Party monster

90,00€ – 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.