For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.
For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.
to protect the sides when you lift the tray, we recommend this product :
Package content :
1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror
Note : Dimensions may vary slightly depending on the model and design chosen.
Pour offrir les meilleures expériences, nous utilisons des technologies telles que les cookies pour stocker et/ou accéder aux informations des appareils. Le fait de consentir à ces technologies nous permettra de traiter des données telles que le comportement de navigation ou les ID uniques sur ce site. Le fait de ne pas consentir ou de retirer son consentement peut avoir un effet négatif sur certaines caractéristiques et fonctions.
Fonctionnel
Always active
L’accès ou le stockage technique est strictement nécessaire dans la finalité d’intérêt légitime de permettre l’utilisation d’un service spécifique explicitement demandé par l’abonné ou l’utilisateur, ou dans le seul but d’effectuer la transmission d’une communication sur un réseau de communications électroniques.
Préférences
L’accès ou le stockage technique est nécessaire dans la finalité d’intérêt légitime de stocker des préférences qui ne sont pas demandées par l’abonné ou l’internaute.
Statistiques
Le stockage ou l’accès technique qui est utilisé exclusivement à des fins statistiques.Le stockage ou l’accès technique qui est utilisé exclusivement dans des finalités statistiques anonymes. En l’absence d’une assignation à comparaître, d’une conformité volontaire de la part de votre fournisseur d’accès à internet ou d’enregistrements supplémentaires provenant d’une tierce partie, les informations stockées ou extraites à cette seule fin ne peuvent généralement pas être utilisées pour vous identifier.
Marketing
L’accès ou le stockage technique est nécessaire pour créer des profils d’internautes afin d’envoyer des publicités, ou pour suivre l’utilisateur sur un site web ou sur plusieurs sites web ayant des finalités marketing similaires.
